Home Members Activities Publications Links

 

 

研究実績

蔭山 坂井

フィルムコーティングしたプリント基板に発生した水トリーの実体顕微鏡による観察

蔭 山

Kageyama, K., Iman, B. A. H., Kimura, K and Sakai, T.: Detection of Cavitation in Stem of Miniature Tomato using Acceleration Sensor, Advanced Experimental Mechanics,1, pp 214-218 (2016).

蔭山 健介,Iman, B. A. H.: 噴霧耕ミニトマトの茎部におけるAE発生挙動が収量および糖度に及ぼす影響, Eco-Engineering, 28, pp 73-77 (2016)

Wu, C. Kageyama, K. and Sakai, T.: Charge Retention of Silica-Agglomerate Electret using Electrostatic Spraying at Elevated Temperatures, Advanced Experimental Mechanics,1, pp 120-125 (2016).

小野寺 将,蔭山 健介: FilmECSアレイを用いたモーションセンサーの製作と特性評価, 電気学会論文誌E, Vol. 136, pp.120-126 (2016).

前田 慎市, 寺岡 拓海, 及川 陽介, 小原 哲郎, 蔭山 健介: 非一様な水素-空気予混合気体におけるデトネーション波の開始, 日本機械学会論文集, Vol1. 82, pp 15-00503 (2016).

Wu, Chenye, Kageyama, K. and Sakai, T.: Improvement of heat resistance of silica-agglomerate electret using electrostatic spraying, Mechanical Engineering Journal, vol. 2, p. 15-00064 (2015).

小野寺 将,蔭山 健介: フィルム積層エレクトレットセンサを用いたデュアルセンサの製作と特性評価, 日本実験力学会誌,Vol. 15, pp64-68 (2015).

蔭山 健介,三村 昌平,坂井 建宣: シリカ凝集体を用いたPFAフィルムエレクトレットの耐熱性向上, 電気学会論文誌E,Vol. 135, pp122-128 (2015).

Kageyama, K. and Tajima, K.: Measurement of Loading Induced Acoustic Emissions at Stem of Miniature Tomato Plants, Journal of JSEM, vol. 14, Special Issue, pp s116-s121, (2014).

Kageyama, K. and Mori, O.: Deficit Irrigation of Miniature Tomato Based on Estimation of Embolism Risk by Measurements of Acoustic Emission and Stress Wave at Stem, Journal of JSEM, vol. 13, Special Issue, pp s85-s91, (2013).

Kageyama, K. and Nagashima, H.: Fabrication and Evaluation of Electret Condenser Sensors with Film Lamination and Silica Spacers, Journal of Advanced Mechanical Design, System, and Manufacturing, vol. 7, pp 655-665, (2013).

Kageyama, K.: Fabrication and Evaluation of Electret Condenser Sensors with Layered Microgaps for Ultrasonic Measurement of Natural Rubbers, Journal of JSEM, vol. 12, pp 37-42, (2012).

Kageyama, K. Kurita, T.: Correlation of Stress Wave Velocity Transmitted Through Stem with Stem Structure of Miniature Tomato, Journal of JSEM, vol. 12, Special Issue, pp s137-s144, (2012).

蔭山 健介,長島 秀明: PFAフィルムを積層したエレクトレットコンデンサマイクロホンの作成と特性評価, 電気学会論文誌E,Vol. 132, pp10-15 (2011).

Kageyama, K., Inoue, Y. and Kato, H.: Estimation for Embolism Risk of Tomato Using Acoustic Emission Response to Increased Drought Stress, Environment Control in Biology, vol. 47, No. 3, pp 127-136 (2009).

Kageyama, K., Kato, H. and Watanabe, S.: Fabrication and Evaluation of Electret Condenser Microphone using Poled Ferroelectric Ceramics, Journal of Solid Mechanics and Materials Engineering, Journal of Solid Mechanics and Materials Engineering, vol. 2, No. 7, pp 877-887 (2008).

Kageyama, K., Watanabe, E. and Kato, H.: Non-Destructive Measurement of Vascular Tissue Development in Stems of Miniature Tomato Using Acoustic Method, Journal of Solid Mechanics and Materials Engineering, Journal of Solid Mechanics and Materials Engineering, vol. 2, No. 12, pp 1487-1496 (2008).

Kageyama, K., Kambara, T. and Nakai, Y.: Detection of Weak Ultrasound Generated by Nano- and Femtosecond Laser Irradiation Using Piezoelectric Sensors, Journal of Solid Mechanics and Materials Engineering, vol. 1, No. 9, pp 1128-1135 (2007).

Kageyama, K., Kaminaga, M. and Kato, H.: Correlation between Acoustic Emissions Generated from Cavitation in Rubber Tree Leaf Veins, Environment Control in Biology, vol. 45, pp 59-66. (2007).

Ahamed, AKMA., Kato, H., Kageyama, K. and Komazaki, T.: Acoustic visualization of cold flakes and crack propagation in aluminum alloy die-cast plate, Materials Science and Engineering A, Vol. 423, pp 313-323 (2006).

Min, X.H., Kato, H., Watanabe, N. and Kageyama, K.: Influence of Overaging on Fatigue Strength and Ultrasonic Parameters of Aluminum Alloy A2024-T3, Journal of JSEM, Vol. 6, pp 282-288 (2006).

Kato, H., Ohmura, S., Toyooka, S., Kawada, Y. and Kageyama, K.: Topographical mapping of surface and interface profiles by using acoustic interferometry, Materials Transactions, vol. 47, No. 6, pp 1572-1576 (2006).

加藤 寛,小林寛嗣,蔭山健介: 鉛フリーはんだ接合材における疲労き裂の音響可視化:銅と銅合金,第45巻,第1号,pp 223-336 (2006).

Min, X.H., Kato, H., Narisawa, N. and Kageyama, K.: Real-time Ultrasonic Measurement during Tensile Testing of Aluminum Alloys, Materials Science and Engineering A, Vol. 392, pp 87-93 (2005).

Kageyama, K., Yoshikawa, T. and Kato, H.: Variation in Electrical Properties of Laminates with Woven Carbon Fabric and Ferroelectric or Piezoelectric Particulate Epoxy due to Tensile Loading, Materials Transactions, Vol. 46, pp 697-703 (2005).

Kato, H., Suzuki, T., Annou, Y. and Kageyama, K.: Nondestructive detection of cold flakes in aluminum alloy die-cast plate with ultrasonic measurement, Materials Transactions, vol. 45, pp 2403-2409 (2004).

Jin, Z.M., Kato, H. and Kageyama, K.: Ultrasonic evaluation of fatigue damaging process of Cu plates joined with Sn- 3.8 wt% Ag- 1.2 wt% Cu alloy solder, Key Engineering of Materials, vol. 270-273, pp 1189-1195 (2004).

Kato, H., Matsubara, K. and Kageyama K.: Decrease in Fatigue Life of Sn-3.8 wt% Ag-1.2 wt% Cu Alloy Solder Joints due to Thermal Cycling, Material Science and Technology, vol. 19, pp 1403-1410 (2003).

Kageyama, K., Harada. Y. and Kato, H.: Preparation and Mechanical Properties of Alumina-Zirconia Composites with Agglomerated Structures Using Pre-Sintered Powder", Materials Transactions, Vol. 44, pp 1571-1576 (2003).

閔 小華,加藤 寛,斉藤博子,蔭山健介: 疲労損傷過程における実時間超音波測定のための局所水浸法の開発,非破壊検査,vol. 52, pp 697-702 (2003).

Kambara, T., Kageyama, K., Kanai, Y., Kojima, T.M., Nakai, Y., Yoneda, A. and Yamazaki, Y.,: Elastic Wave from Fast Heavy-ion Irradiation on Solids, Nuclear Instruments and Methods in Physics Research B, vol. 193, pp 371-375 (2002).

H. Kato, T. Masaki and K. Kageyama, "Influence of Thermal Cycling on Fatigue Strength of Cu/Sn/Cu Solder Joints", Materials Science and Technology, vol. 17, pp 1306-1312 (2001).

加藤 寛, 糸井 望, 蔭山 健介: 塑性変形した黄銅平板における局所ひずみと超音波因子との関係“, 非破壊検査, Vol. 73, pp 34-40 (2001).

Kambara, T., Kanai, Y., Kojima, T.M., Nakai, Y., Yonda, A., Kageyama, K. and Yamazaki, Y.: Acoustic Emission from Fast Heavy-ion Irradiation on Solids, Nuclear Instruments and Methods in Physics Research B, Vol. 164-165, pp 415-419 (2000).

Kato, H., Horikawa, S. and Kageyama, K.: Influence of Solder Thickness on Interfacial Structures and Fatigue Properties of Cu/Sn/Cu Joints, Materials Science and Technology, Vol. 15, pp 851-856 (1999).

蔭山 健介, 加藤 寛, 大井 健司, 小林 進, “再生原料を用いた焼結アルミナの力学的特性の評価“, 日本セラミックス協会論文誌, Vol. 107, pp 482-486 (1999).

蔭山 健介, 加藤 寛, 旗本 隆, 浅沼 孝治: PZTの圧電特性に及ぼすき裂の発生および進展の影響“, 日本金属学会誌, Vol. 63, pp 1231-1237 (1999).

Kato, H. and Kageyama, K.: Chemical reaction assisted transient liquid phase bonding of alumina in combination with cold isostatic pressing, Material Science and Technology, Vol. 14, pp 712-718 (1998).

蔭山 健介, 加藤 寛: 楕円体粒子分散ガラス基複合材料のき裂の偏向、湾曲による高靭化の数値解析, 日本金属学会誌, Vol. 61, pp 291-297 (1997).

Kageyama, K., Enoki, M., and Kishi, T.,: Numerical Simulation of Toughening of Alumina Particulate Glass Matrix Composite by Interfacial Precipitation, Ceramic Transactions Vol. 46 (Advances in Ceramic-Matrix Composites II), pp 765-776, (1995).

蔭山 健介, 榎 学, 岸 輝雄, 生稲 一洋, 木村 光: セラミックス粒子分散ガラス基複合材料における第二相粒子による微視破壊過程の変化, 日本金属学会誌, Vol. 59, pp 140〜144 (1995).

Kageyama, K., Enoki, M., and Kishi, T.: Mechanical Properties of Alumina Particulate and Platelet-Reinforced Glass Composites with a Crystalline Phase at the Interface, Journal of the Ceramic Society of Japan, Vol. 103, pp 205-210 (1995).

蔭山 健介, 榎 学, 岸 輝雄: アルミナ粒子分散ガラス基複合材料におけるき裂の偏向、湾曲による高靭化の数値シミュレーション, 日本セラミックス協会論文誌, Vol. 103, pp 1251〜1257 (1995).

蔭山 健介, 榎 学, 岸 輝雄, 生稲 一洋, 木村 光: アルミナ粒子分散ガラス基複合材料のアノーサイト結晶析出による微視破壊の制御, 日本金属学会誌, Vol. 57, pp 756〜760 (1993).

蔭山 健介, 榎 学, 岸 輝雄: 部分安定化ジルコニアの変態領域形成過程とR曲線挙動の数値シミュレーション, 日本金属学会誌, Vol. 56, pp 764-769 (1992).

Kaneko, T., Kageyama, K., Sasaki, T. and Yamamoto, R.: Computer Simulation of the Growth of Ni on a Ni (111)

 


坂 井

[1] 坂井 建宣, 宗宮 詮, ガラス繊維強化ポリカーボネートのクリープ挙動に及ぼすフィジカルエージングの影響, 材料, Vol.56, No. 5, pp399-405, 2007

[2] Takenobu SAKAI and Satoshi SOMIYA, Estimating Creep Deformation of Glass-Fiber-Reinforced Polycarbonate, Mechanics of Time Dependent Materials, Vol. 10, No. 3, pp185-199, 2006

[3] Takenobu SAKAI, Takayuki TAO and Satoshi SOMIYA, Viscoelasticity of Shape Memory Polymer: Polyurethane series DiARY®, Journal of Solid Mechanics and Materials Engineering, Vol. 1, No. 4, pp480-489, 2007

[4] Takenobu SAKAI and Satoshi SOMIYA, Effect of Thermal History on the Creep Behavior of Polycarbonate, Journal of Solid Mechanics and Materials Engineering, Vol. 3, No. 11, pp 1193-1201, 2009

[5] 坂井 建宣, 上野 宗一郎, 山田 幸市, 宗宮 詮, ポリアセタールの結晶状態を考慮したクリープ解析, 実験力学, Vol. 9, No. 4, pp388-394, 2009

[6] 坂井 建宣, 隅原 晋平, 宗宮 詮, 多段荷重下におけるポリカーボネートのクリープ挙動,材料システム,Vol. 28, pp 9-14, 2010

[7] 坂井 建宣, 平井 悠斗, 宗宮 詮, ガラス繊維強化ポリアミドの繊維含有率及び結晶化度がクリープ挙動に及ぼす影響, 材料システム, Vol. 29, pp53-60, 2010

[8] 坂井 建宣, 野溝 寿一, 宗宮 詮, 炭素繊維強化熱可塑性ポリイミドのクリープ挙動に及ぼすフィジカルエージングの影響, 実験力学, Vol. 10, No. 4, pp 401-406, 2010

[9] Takenobu Sakai and Satoshi Somiya, Analysis of creep behavior in thermoplastics based on visco-elastic theory, Mechanics of Time Dependent Materials, Vol. 15, No. 3, pp 293-308, 2011

[10] Takenobu SAKAI, Koichi OKABE and Satoru YONEYAMA, Effect of Powder Contents on Viscoelastic Behavior of Glass Powder Filled Epoxy Resin, 2011 Special Issue of Journal of the Japanese Society for Experimental Mechanics, Vol. 11, pp187-191, 2011

[11] Takenobu Sakai, Tomohiko Gushiken, Jun Koyanagi, Rolando Rios-Soberanis, Tomoki Masuko, Satoshi Matsushima, Satoshi Kobayashi and Satoru Yoneyama, Effect of Viscoelastic Behavior on Electroconductivity of Recycled Activated Carbon Composites, Applied Mechanics and Materials, Vol. 70, pp 231-236, 2011

[12] Shuichi Wakayama, Nobuyuki Takagi, Takenobu Sakai, Masashi Ikegami and Tsutomu Miyasaka, AE Monitoring of Damage Accumulation in Transparent Conductive Oxide Film under the Mechanical Strain, Journal of Solid Mechanics and Materials Engineering, Vol. 5, No. 12, pp.774-779, 2011

[13] Kosuke UMINO, Shuichi WAKAYAMA, Takenobu SAKAI, Yuka UMEHARA and Takashi AKATSU, Mechanical Properties of CNF Reinforced Ceramic Composites Sintered with SPS Technique, Journal of Solid Mechanics and Materials Engineering, Vol. 5, No. 12, pp.866-872, 2011

[14] Takenobu Sakai and Satoshi Somiya, Estimating the creep behavior of polycarbonate with changes in temperature and aging time, Mechanics of Time Dependent Materials, Vol. 16, No. 3, pp.241-249, 2012

[15] 坂井 建宣, C-R Rios Rolando, 若山 修一, NCFの曲げ挙動に及ぼすZ糸の影響, 材料システム, Vol. 30, pp.35-40, 2012

[16] 坂井 建宣, 川畑 有紀子, 宗宮 詮, 炭素繊維強化ポリエーテルエーテルケトンの繊維および結晶化を考慮したクリープ解析, 実験力学, Vol. 12, No. 2, pp.26-32, 2012

[17] Carlos Rolando Rios-Soberanis, Shuichi Wakayama, Takenobu Sakai, José de los Ángeles Rodriguez Laviada and Emilio Pérez Pacheco, Manufacture of partially biodegradable composite materials based on PLA-Tires powder: process and characterization, International Journal of Polymer Science, Vol. 2013, pp 1-8, 2013

[18] Takenobu SAKAI, Shuichi WAKAYAMA, E. PEREZ-PACHECO, J. RODRIGUEZ-LAVIADA and C.R. RIOS-SOBERANIS, Damage Accumulation Behavior of Non-Crimp Fabric in tension mode (static and cyclic), Advanced Composite Materials, Vol. 70, pp 231-236, 2013

[19] Takenobu SAKAI, Satomi SUZUKI, Shuichi WAKAYAMA, Satoru YONEYAMA and Ei YAMAMOTO, Characterization of Damage Process of Rabbit Tendon by Acoustic Emission Technique in Vitro, 2013 Special Issue of Journal of the Japanese Society for Experimental Mechanics, Vol. 13, pp.s213-s216, 2013

[20] C-R. Rios-Soberanis, S. Wakayama, T. Sakai, J.M. Cervantes-Uc and A. May-Pat, Evaluation of Mechanical Behaviour of Bone Cements by Using Acoustic Emission Technique, Advanced Materials Research, Vol. 856, pp.246-250, 2014

[21] Takenobu SAKAI, Shuichi WAKAYAMA, Go KAMETANI, Katsumi YOSHIDA and Takashi AKATSU, Characterization of crack growth resistance under thermal shock on silicon nitride with various microstructure, Bulletin of JSME Mechanical Engineering Journal, Vol. 1, No. 1, pp. 1-10, 2014

[22] Takenobu SAKAI, Yasunori IIHARA and Satoru YONEYAMA, Photoelastic Stress Analysis of the Fiber/Matrix Interface in a Single-Fiber Composite, 2014 Special Issue of Journal of the Japanese Society for Experimental Mechanics, Vol. 14, pp.s213-s216, 2014

[23] 蔭山 健介,三村 昌平,坂井 建宣,シリカ凝集体を用いたPFAフィルムエレクトレットの耐熱性向上,電気学会論文誌,Vol. 135, No. 4, pp122-128, 2014

[24] Takenobu Sakai, Tomohiko Gushiken, Calros-Rolando Rios-Soberanis, Tomoki Masuko, Satoshi Matsushima, Satoshi Kobayashi, Satoru Yoneyama and Shuichi Wakayama, Fracture Behavior of Wasted Activated Carbon Powder Composites, Advanced Composite Materials, Vol. 25, Issue 4, pp. 375-384, 2016

[25] O.F. Pacheco-Salazar, Shuichi Wakayama, Takenobu Sakai, J.V. Cauich-Rodríguez, C.R. Ríos-Soberanis and J.M. Cervantes-Uc, Evaluation of damage progression and mechanical behavior under compression of bone cements containing core-shell nanoparticles by using acoustic emission technique, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 46, pp.137-147, 2015.

[26] Chenye WU, Kensuke KAGEYAMA, Takenobu SAKAI, Improvement of heat resistance of silica-agglomerate electret using electrostatic spraying, Mechanical Engineering Journal, Vol. 2 No. 3, p. 15-00064, 2015

[27] 坂井 建宣,飯原 靖憲,米山 聡,実験-数値ハイブリッド法を用いた繊維-樹脂界面応力解析,実験力学,Vol.15, No. 3, pp.169-174

[28] Takenobu Sakai, Takayuki Tao and Satoshi Somiya, Estimation of creep and recovery behavior of a shape memory polymer, Mechanics of Time Dependent Materials, Vol. 19, pp. 569-579, 2015

[29] O. F. Pacheco-Salazar, Shuichi Wakayama, Takenobu Sakai, C. R. Ríos-Soberanis, J. V. Cauich-Rodríguez and J. M. Cervantes-Uc, Damage accumulation studied by acoustic emission in bone cement prepared with core–shell nanoparticles under fatigue, Journal of Materials Science, Vol. 51, No. 12, pp. 5635-5645, 2016

[30] 小柳興瑶, 喜多村竜太, 松葉 朗, 河野洋輔, 中谷隼人, 坂井建宣, 荻原慎二, 熱可塑性樹脂を母材とした繊維不連続有する一方向強化 CF/PA6積層板の損傷挙動評価, 材料, Vol. 54, No. 8, pp.555-560, 2016

[31] Takenobu Sakai, Satomi Suzuki and Shuichi Wakayama, Sensitivity Enhancement of FBG Sensors for Acoustic Emission Using Waveguides, Experimental Mechanics, Vol. 56, pp.1439-1447, 2016

[32] Ota S, Ando S, Tozawa Y, Nakamura T, Okamoto S, Sakai T, Hase K. Preliminary study of optimal measurement location on vibroarthrography for classification of patients with knee osteoarthritis. J Phys Ther Sci., Vol. 28, pp.2904-2908, 2016

[33] Noboru HIROSHIMA, Hiroshi HATTA, Yuuichi NAGURA, Masashi KOYAMA, Takenobu SAKAI and Yasuo KOGO, Spin test of three-dimensional composite rotor using polymer ring as a connection device for high-speed flywheel, Mechanical Engineering Journal, Vol. 3, No. 4, pp. 1-12, 2016

[34] Kageyama, K., Iman, B. A. H., Kimura, K and Sakai, T., Detection of Cavitation in Stem of Miniature Tomato using Acceleration Sensor, Advanced Experimental Mechanics,1, pp 214-218 (2016).

[35] Chenye WU, Kensuke KAGEYAMA, Takenobu SAKAI, Charge Retention of Silica-Agglomerate Electret using Electrostatic Spraying at Elevated Temperatures, Advanced Experimental Mechanics,1, pp 120-125 (2016).

[36] 岡田瑞生, 上田政人, 後藤健, 小林訓史, 坂井建宣, 荒井広明, 平織炭素繊維強化熱可塑性ポリイミド複合材の曲げクリープにおける時間-温度依存性,日本複合材料学会誌,43巻 2号, (2017), pp.41-47

[37] Jonathon Tanks, Katherine Rader, Stephen Sharp, Takenobu Sakai, Accelerated creep and creep-rupture testing of carbon fiber laminates using the stepped isostress method, Composite Structures, Vol. 159, pp.455-462, 2016

[38] 蔭山健介,魯子 暁,菅原拓也,坂井建宣,樹木のアコースティック・エミッション測定を目的としたエレクとレットセンサの製作と特性評価,実験力学,Vol. 16, No. 3, (2016) pp.9-14

[39] 坂井建宣,柴山正輝,野方文雄,蔭山健介,フレキシブル基板を用いた胸部表面振動計測装置の開発,実験力学,Vol. 17, No. 1 (2017) pp.39-44

[40] 坂井建宣,林和輝,河村洋子,横田康成,野方文雄,胸部表面の微細振動計測による心臓運動の可視化および心音源の位置標定,実験力学,Vol. 17, No. 1 (2017) pp.45-51

[41] C.R. Rios-Soberanis, J. Rodriguez-Laviada, E. Perez-Pecheco, T. Sakai and S. Wakayama, Acoustic Emission Technique Applied in Textiles Mechanical Characterization・ MATEC Web of Conferences, 95, 07016, pp. 1-4, (2017) DOI: 10.1051/matecconf/2017950.

[42] 坂井建宣,安部聡,後藤健,小林訓史,上田政人,荻原慎二,若山修一,蔭山健介,AE法を用いた炭素繊維強化熱可塑性ポリイミドの破壊過程の解明,実験力学,Vol. 17, No. 1 (2017) pp.27-33

[43] 高橋智彦,坂井建宣,宗宮詮,廃棄CFRPを基とする炭素/炭素複合材料の高機能化の研究,強化プラスチック協会誌,accepted

 

 

研究テーマに関する御質問などございましたら、 蔭山まで御連絡ください。
共同研究などに関心のある方もどうぞお気軽に御相談ください。
Copyright 2000-2011 Material Science and Engineering Laboratory, Saitama University